PA66德国朗盛（授权）朗盛总代理商：

PA性质：结晶性热可塑性塑料，有明显熔点，Nylon6 Tm为220-230℃，Nylon66则为260-270，Nylon本身具吸水基故有吸水性，成形前须干燥，温度过高干燥则尼龙粒变色。
优点：1、具高抗张强度；2、耐韧、耐冲击性特优；3、自润性、耐磨性佳、耐药品性优；4、低温特性佳；5、具自熄性
用途：电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座
汽车： 散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座
工业零件：椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输
分类：防静电PA，导电PA，加纤防火PA，防火PA，抗紫外线耐候PA，高温挤出级PA。

Durethan AKV 15 H3.0 000000 PA 66, 15% glass fibers, injection molding, heat-aging stabilized.
Durethan AKV 25 F30 000000 PA 66, 25 % glass fibers, injection molding, flame retardant
Durethan AKV 30 000000 PA 66, 30 % glass fibers, injection molding
Durethan AKV 30 G H2.0 SR1 900051
PA 66, 30 % glass fibers, injection molding, heat-aging stabilized, improved surface finish.
Durethan AKV 30 G HR DUS023 900116
PA 66, 30 % glass fibers, injection molding, improved flowability, hydrolysis stabilized, improved surface finish, GIT/WIT
Durethan AKV 30 GIT H2.0 900116 PA 66, 30 % glass fibers, injection molding, heat-aging stabilized, improved surface finish, GIT/WIT
Durethan AKV 30 H2.0 901510 PA 66, 30 % glass fibers, injection molding, heat-aging stabilized
Durethan AKV 30 H3.0 000000
PA 66, 30 % glass fibers, injection molding, heat-aging stabilized
Durethan AKV 30 HR H2.0 901510 PA 66, 30 % glass fibers, injection molding, heat-aging stabilized, hydrolysis stabilized
Durethan AKV 325 H2.0 901510 PA 66, 25 % glass fibers, extrusion, blow molding, heat-aging stabilized, hydrolysis stabilized Applications: Profiles, hollow parts and pipes for the automotive cooling circuit
Durethan AKV 35 000000 PA 66, 35% glass fibers, injection molding
Durethan AKV 35 CX H2.0 900876 PA 66, 35 % glass fibers, injection molding, heat aging stabilized Applications: Chemically or physically (MuCell process) foamed applications like engine and valve covers
Durethan AKV 35 H2.0 901510 PA 66, 35 % glass fibers, injection molding, heat-aging stabilized Applications: gearbox oil sumps, oil modul
Durethan AKV35 H2.0 SR1 901510 PA 66, 35 % glass fibers, injection molding, heat-aging stabilized, improved surface finish
Durethan AKV 35 H3.0 000000
PA 66, 35 % glass fibers, injection molding, heat-aging stabilized
Durethan AKV 35 HR H2.0 901510